Specifications

hg-06.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
6-57
Nur für den internen Gebrauch
Maintenance
SNMP
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
6.8.1.13 Delete Community
You can delete an individual community (IP address).
WBM path for read communities:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance >
SNMP > (double-click) Communities > (double-click) Read Communities or Write Communities
or Trap Communities > (right-click) selected IP address > Delete Community
An important warning is displayed. Click Delete followed by OK in the confirmation mask (save
the new configuration status permanently with the Save icon in the control area).
6.8.2 Traps
If gateway problems occur, traps are generated to inform administrators of errors and failures.
The following types of trap are available:
● System Traps (system errors that require immediate corrective action)
● Performance Traps (information on performance problems that do not require corrective
action)
For further information on traps, see Section 9.9.1, "Traps".
Traps are classified according to their effect and are color-coded in the tree structure accord-
ingly.
Traps are displayed in the tree structure in the order that they occur in the system.
Effect Classes Bullet Point Colors
Critical Red
Major Red
Minor Orange
Warning Yellow
Deleted Green
Informative Gray
Intermediate status Gray
Other traps Gray
Table 6-1 Effect Classes for Traps