Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-58 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
SNMP
WBM path:
WBM > Maintenance > SNMP > Tr a p s
Right-click Tra ps to display a menu containing the following entries:
> Display All Traps
> Display All Critical Traps
> Refresh
Traps (folder):
If traps are available, the entry Tr a ps is represented by a folder icon in the tree structure. Dou-
ble-clicking Tra p s adds the available traps to the tree structure. The following function is avail-
able in this case:
> Display Trap
6.8.2.1 Display All Traps
You can display a list containing detailed information on all traps currently available in the sys-
tem.
WBM path:
WBM > Maintenance > SNMP > (right-click) Traps > Display All Traps
The List of All Traps mask is displayed. Traps are displayed in the table in the order that they
occur in the system. The display is automatically updated every 30 seconds. However, by click-
ing Refresh, you can also update the list manually at any time.
6.8.2.2 Display All Critical Traps
You can display a list containing detailed information on system-critical traps (those indicated
by a red bullet point).
WBM path:
WBM > Maintenance > SNMP > (right-click) Traps > Display All Critical Traps
The List of All Critical Traps mask is displayed. Traps are displayed in the table in the order that
they occur in the system. The display is automatically updated every 30 seconds. However, by
clicking Refresh, you can also update the list manually at any time.