Specifications

Maintenance Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
6-62 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-06.fm
Admin Log
● Remote File Name (PC File System): Enter the file name under which the log file should
be saved.
Click Load followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
6.9.2.2 Load via HTTP
You can transfer the administration log file from HG 1500 to the computer used to administer
the gateway.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Ad-
min Log > (right-click) Admin Log Data > Load via HTTP
Once the file has been transferred it will be shown immediately in the system editor.
6.9.2.3 Delete Log File on Gateway
The log file can be deleted from the gateway flash memory. This is useful if you have performed
Load via TFTP or Load via HTTP.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Maintenance > Ad-
min Log > (right-click) Admin Log Data > Delete Log File on Gateway
A warning is displayed. Click Delete Log followed by OK in the confirmation mask (save the new
configuration status permanently with the Save icon in the control area).
>
The gateway automatically enters the IP addresses last entered for the default and
alternative TFTP servers. You only need to edit these addresses if they have been
changed.