Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-2 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Basic Settings
7.1.1 System
The "System" folder provides information on the current status or the current configuration of
key system components.
WBM path:
WBM > Explorers > Basic Settings > System
System (folder):
The following entries are displayed if you double-click the folder icon System:
> Hardware Configuration
> Software Build
> CPU
> Temperature Sensor
> Memory
> Flash
> Net Stack Resources
7.1.1.1 Hardware Configuration
This entry allows you to view detailed information about the HG 1500 hardware.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (single-click) Hardware Configu-
ration
The Hardware Configuration dialog is displayed. It offers the following information:
● Start parameters ("Boot Line")
● Hardware identification of the board (board ID in HiPath 3000, e.g. 0x007D)
● Serial Number (system serial number - corresponds to the sticker on the board, e.g.,
SPU34030530131)
● Parts List (parts list version, e.g. -04)
● Board Revision (HXG3 board version, e.g. 0x04)
● Boot ROM Version
● FPGA (Field Programmable Gate Array) version data. (FPGA CID version is the chip ver-
sion, e.g. 2 and FPGA FW version is the version for the EEPROM FPGA code, e.g. 1.5)
● DELIC (DSP Embedded Line and Port Interface Controller) Firmware Version.