Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-5
Nur für den internen Gebrauch
Explorers
Basic Settings
Right-click Memory to display a menu containing the following entries:
> Display Memory State
> Display System Memory Usage
> Display DMA Memory Usage
Display Memory State
This option allows you to check if memory monitoring is active and what time cycle is set.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Memory > Display
Memory State
The Memory State mask appears. It displays if memory monitoring is active or inactive. Moni-
toring Timer (sec) indicates the length of time (in seconds) during which the measured usage
is compared with the threshold value. Monitoring Logging Timer (sec) indicates the length of
time (in seconds) before an event is logged in the log file.
Display System Memory Usage
This option allows you to display the current system memory usage.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Memory > Display
System Memory Usage
The System Memory Usage mask is displayed. The following parameters are displayed:
● Absolute Memory Size (free/used): Number of total, free and allocated bytes, number of
free and allocated blocks, size of the largest free block.
● Memory Used (in %): Current system memory usage as a percentage and maximum sys-
tem memory usage until the information is displayed.
Display DMA Memory Usage
This option allows you to display the current DMA memory usage.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Memory > Display
DMA Memory Usage
The DMA Memory Usage mask is displayed. The following parameters are displayed: