Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-6 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Basic Settings
● Absolute Memory Size (free/used): Number of total, free and allocated bytes, number of
free and allocated blocks, size of the largest free block.
● Memory Used (in %): Current system memory usage as a percentage and maximum sys-
tem memory usage until the information is displayed.
7.1.1.6 Flash
This entry allows you to display details on flash memory usage.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > Flash
Right-click Flash to display a menu containing the following entries:
> Display Flash State
> Display Flash Usage
Display Flash State
This option allows you to check if the temperature sensor is active and what time cycle is set.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Flash > Display Flash
State
The Flash Memory State mask is displayed. It indicates if flash monitoring is active. Monitoring
Timer (sec) indicates the length of time (in seconds) during which the measured usage is com-
pared with the threshold value. Monitoring Logging Timer (sec) indicates the length of time (in
seconds) before an event is logged in the log file.
Display Flash Usage
This option allows you to display the current system memory usage.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Flash > Display Flash
Usage
The Flash Memory Usage mask is displayed. The following parameters are displayed:
● Flash Memory Size: Size of the total memory and the size of the used and free areas in
bytes.
● Flash Memory Used (in %): Current system memory usage as a percentage and maximum
system memory usage until the information is displayed.