Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-7
Nur für den internen Gebrauch
Explorers
Basic Settings
7.1.1.7 Net Stack Resources
You can display the available resources as well as the state of the net stack memory.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > Net Stack Resources
Right-click Net Stack Resources to display a menu containing the following entries:
> Display Net Pool State
> Display System Pools
> Display Data Pools
Display Net Pool State
This option allows you to check if memory monitoring is active and what time cycle is set.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Net Stack Resources
> Display Net Pool State
The Net Stack Pool Status mask is displayed. It indicates if net stack monitoring is active. Mo-
nitoring Timer (sec) indicates the length of time (in seconds) during which the measured usage
is compared with the threshold value. Monitoring Logging Timer (sec) indicates the length of
time (in seconds) before an event is logged in the log file.
Display System Pools
This option allows you to display the net stack resources for system pools.
WBM path:
WBM > Explorers > Basic Settings > (double-click) System > (right-click) Net Stack Resources
> Display System Pools
The Net Stack Resources for System Pools mask is displayed. It displays the number of allo-
cated and available blocks in the net stack memory system pool in block sizes of 64 bytes, 128
bytes, 256 bytes and 512 bytes. The mask also provides information on used and free ele-
ments, the current use and the maximum use so far.
Display Data Pools
This option allows you to display the net stack resources for data pools.