Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-9
Nur für den internen Gebrauch
Explorers
Basic Settings
● System Name: This field contains the name of the system. Enter a character string in this
field.
● Gateway Location: This field contains information about the installation site for the
HiPath 3000 system. This information helps service technicians to locate the gateway
when the device needs to be physically accessed. Enter a character string in this field.
● Contact Address: This field contains information about the person to be contacted if prob-
lems arise with the gateway. Enter a character string in this field.
● System Country Code: The country code set during installation and the relevant country
are displayed for information purposes. This entry cannot be modified here.
● Function Type: The gateway IP address and the subnet mask are displayed for information
purposes.
● Gateway IP Address: The gateway’s IP address is displayed for information purposes. This
entry cannot be modified here.
● Gateway Subnet Mask: The gateway’s subnet mask is displayed for information purposes.
This entry cannot be modified here.
● Enhanced B Channels: Select this option if you want to use up to 60 B channels (disabled:
up to 32 B channels).
You cannot use the internal firewall and VPN/IPsec features if you activate the Enhanced
B Channels option. If these features are active, a warning is output when you try to enable
them. The features will be disabled if you confirm this warning with "OK".
● DMC Interworking: This entry indicates if DMC Interworking is active.
● Use Gatekeeper: In this field, select the gatekeeper where the HG 1500must register. Cis-
co must be set for a Cisco gatekeeper. OpenScape Voice must be set for a gatekeeper in
OpenScape Voice. You can use default for all other scenarios.
● Protocol Variant "Extended Fast Connect" Active: This field displays whether or not the pro-
tocol variant "Extended Fast Connect" is active. In HiPath 3000/5000 V7, the CorNet-IP
protocol has been enhanced to include the protocol variant EFC (Extended Fast Connect).
EFC is required for features such as signaling ad voice data encryption in company net-
works (LAN) and IP/IP E2E Payload Via Enterprise Proxy for Internet telephony. If EFC is
enabled, all IP workpoints (HFA) in a system or all IP workpoints (HFA) in a network must
be EFC-capable. The EFC protocol is activated in initial state (default). This setting should
not be changed because this can otherwise lead to restrictions in features.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).