Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-11
Nur für den internen Gebrauch
Explorers
Basic Settings
In addition to the general ILS settings, you must specify that ILS is to be used for address res-
olution in order to use the ILS function (see Section 7.5.6.4, "Nodes").
WBM path:
WBM > Explorers > Basic Settings > ILS Settings
Right-click ILS Settings to display a menu containing the following entries:
> Display
> Edit
7.1.4.1 Display
This option allows you to display the ILS settings.
WBM path:
WBM > Explorers > Basic Settings > (right-click) ILS Settings > Display
The ILS Settings mask is displayed. The IP address of the ILS server and the ILS network name
are specified here.
7.1.4.2 Edit
This option allows you to edit the ILS settings.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Basic
Settings > (right-click) ILS Settings > Edit
The ILS Settings mask is displayed. You can edit the following data:
● IP Address of ILS Server: Enter the IP address of the ILS in this field.
● Unique ILS Network Name: Enter a unique name for the ILS network in this field.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.1.5 DynDNS
The abbreviation DynDNS stands for "dynamic Domain Name Service". DynDNS allows you to
assign a fixed host name to the dynamic assigned IP addresses supplied by your Internet Ser-
vice Provider. The Internet service offered by the site DynDNS.org is used for this purpose.
Please refer to http://www.dyndns.org/services/dyndns/ for further information.