Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-14 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Basic Settings
If all IP addresses are fixed, but DNS names are nevertheless in use, then the periodic updating
of the DNS names can be disabled. In any case, however, if DNS names are used in the Gate-
way, all DNS names will be resolved after the Gateway is rebooted and after the configured
VPN tables are activated.
You can display and edit the update timer settings.
WBM path:
WBM > Explorers > Basic Settings > (right-click) DynDNS > Update Timer for DNS Names
Right-click Update Timer for DNS Names to display a menu containing the following entries:
> Display Update Timer
> Edit Update Timer
Display Update Timer
This option allows you to view the settings for the time at which the DNS names are updated.
WBM path:
WBM > Explorers > Basic Settings > DynDNS > (right-click) Update Timer for DNS Names >
Display Update Timer
The DNS Name Update Timermask is displayed. For descriptions of the individual fields, see
Section 7.1.5.2, "Edit Update Timer".
Edit Update Timer
This option allows you to edit the settings for the time at which the DNS names are updated.
WBM path:
WBM > Explorers > Basic Settings > DynDNS > (right-click) Update Timer for DNS Names >
Edit Update Timer
The DNS Name Update Timermask is displayed. You can edit the following data:
● Update DNS Names: If this option is activated, the DNS names used in the Gateway will
be periodically updated after the time interval set under "Time Interval for Updating DNS
Names“. If this option is not activated, no periodic update will take place.
● Update Timer Value for DNS Names (sec): In this field, enter the number of seconds for
the interval between two updates. The default value for this field is 600, which corresponds
to an update interval of 10 minutes.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).