Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-18 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Basic Settings
WBM path:
WBM > Explorers > Basic Settings > SNTP Settings
Right-click SNTP Settings to display a menu containing the following entries:
> Display
> Edit
> Reset Time Request Counter
7.1.8.1 Display
This option allows you to display the current settings and status of the SNTP server.
WBM path:
WBM > Explorers > Basic Settings > (right-click) SNTP settings > Display
The SNTP Settings mask is displayed. For descriptions of the individual fields, see Section
7.1.8.2, "Edit".
7.1.8.2 Edit
This option allows you to edit the current settings and status of the SNTP server.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Basic
Settings > (right-click) SNTP settings > Edit
The SNTP Settings mask is displayed. You can make the following entries:
● Start/Stop SNTP Server: You must select this checkbox to start the SNTP server. To stop
the SNTP server, clear this checkbox.
The SNTP server status is displayed for information purposes, as is the time difference to
Greenwich Mean Time (UTC) and the number of timestamps sent (board time information sent
on request to clients).
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.1.8.3 Reset Time Request Counter
This option allows you to reset the time request counter.