Manualshelf

Specifications

ManualsBrandsSiemens ManualsIP PhoneHIPATH V1.2.33
161162163164165166167168169170
Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-28 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
Right-click MAC Address Filteringto display a menu containing the following entries:
> Display MAC Address Filtering
> Enable MAC Address Filtering / Disable MAC Address Filtering
> Add Rule for MAC Address Filtering
> Delete all MAC Address Filtering Rules
> MAC Address Filtering Table Editor
MAC Address Filtering (folder):
If you have already added MAC address filtering rules (see Section 7.2.1.4, "Add Rule for MAC
Address Filtering"), MAC Address Filtering is displayed as an expandable folder. In this case,
double-click MAC Address Filtering in the tree structure to view the defined MAC filter rules.
Right-click an individual filter rule to display a menu containing the following entries:
> Display Rule for MAC Address Filtering
> Edit Rule for MAC Address Filtering
> Delete MAC Address Filtering Rule
> Activate Rule / Deactivate Rule
7.2.1.1 Display MAC Address Filtering
This option allows you to check if MAC Address Filtering is activated for the LAN interface. It
also display a table that contains all MAC address filtering rules defined.
WBM path:
WBM > Explorers > Security > (right-click) MAC Address Filtering > Display MAC Address Fil-
tering
The MAC Address Filtering mask is displayed. The table contains the IP address, the MAC ad-
dress and the activation status for every MAC address filtering rule.
7.2.1.2 Enable MAC Address Filtering
This option is only available if MAC address filtering rules have already been added (see Sec-
tion 7.2.1.4, "Add Rule for MAC Address Filtering") and MAC Address Filtering is disabled. You
can enable MAC filtering.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (right-click) MAC Address Filtering > Enable MAC Address Filtering
A warning is displayed. Confirm this message with OK (save the new configuration status per-
manently with the Save icon in the control area).