Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-32 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
7.2.1.11 Deactivate Rule
If rules for MAC address filtering have been defined, you can deactivate MAC address filtering
rules that are currently activated (green icon).
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) MAC Address Filtering > (right-click) selected rule > Deactivate Rule
A warning is displayed. Confirm this message with OK (save the new configuration status per-
manently with the Save icon in the control area).
7.2.2 IP Address Filtering
IP Address Filtering protects HG 1500 against unauthorized access (for example via an exter-
nal network or an external PC). If IP address filtering has been activated, access to the released
IP addresses via an unprotected network is restricted.
WBM path:
WBM > Explorers > Security > IP Address Filtering
Right-click IP Address Filtering to display a menu containing the following entries:
> Display IP Address Filtering
> Enable IP Address Filtering / Disable IP Address Filtering
> Add Rule for IP Address Filtering
> Delete all IP Address Filtering Rules
> IP Address Filtering Table Editor
IP Address Filtering (folder):
If rules have already been added for IP address filtering, IP Address Filtering is displayed as
an expandable folder. In this case, double-click IP Address Filtering in the tree structure to view
the defined IP filter rules. Right-click the individual filter rules to display a menu containing the
following entries:
> Display Rule for IP Address Filtering
> Edit Rule for IP Address Filtering
> Delete IP Address Filtering Rule
> Activate Rule / Deactivate Rule
>
Information about the IP protocols and port numbers used in HiPath 2000 V1.0 can
be found in Appendix C of the HiPath 2000 Service Manual.