Manualshelf

Specifications

ManualsBrandsSiemens ManualsIP PhoneHIPATH V1.2.33
161162163164165166167168169170
hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-33
Nur für den internen Gebrauch
Explorers
Security
7.2.2.1 Display IP Address Filtering
This option allows you to check if IP Address Filtering is activated for the LAN interface. It also
displays a table that contains detailed data on every IP address filtering rule defined.
WBM path:
WBM > Explorers > Security > (right-click) IP Address Filtering > Display IP Address Filtering
The IP Address Filtering mask is displayed. The table contains detailed data on every IP ad-
dress filtering rule defined (for information on the meaning of the column headings, see the rel-
evant field descriptions under Section 7.2.2.4, "Add Rule for IP Address Filtering".
WBM path:
WBM > Explorers > Security > (right-click) MAC Address Filtering > Display MAC Address Fil-
tering
7.2.2.2 Enable IP Address Filtering
This option is only available if IP address filtering rules have already been added (see Section
7.2.2.4, "Add Rule for IP Address Filtering") and IP Address Filtering is disabled. This option
permits you to enable the IP Filter.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (right-click) IP Address Filtering > Enable IP Address Filtering
A warning is displayed. Confirm this message with OK (save the new configuration status per-
manently with the Save icon in the control area).
7.2.2.3 Disable IP Address Filtering
This option is only available if IP address filtering rules have already been added (see Section
7.2.2.4, "Add Rule for IP Address Filtering") and IP Address Filtering is enabled. This option
permits you to disable the IP Filter.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (right-click) IP Address Filtering > Disable IP Address Filtering
A warning is displayed. Confirm this message with OK (save the new configuration status per-
manently with the Save icon in the control area).