Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-36 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
7.2.2.7 Display Rule for IP Address Filtering
If rules for IP address filtering have been defined, you can edit the data for the individual IP ad-
dress filtering rules.
WBM path:
WBM > Explorers > Security > (double-click) IP Address Filtering > (right-click) relevant rule >
Display IP Address Filtering
The IP Address Filtering mask is displayed. For descriptions of the individual fields, see Section
7.2.2.4, "Add Rule for IP Address Filtering".
7.2.2.8 Edit Rule for IP Address Filtering
If rules for IP address filtering have been defined, you can edit the data for individual IP address
filtering rules.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Address Filtering > (right-click) selected rule > Edit Rule for IP Address Fil-
tering
A warning is displayed. Confirm this message with OK. The IP Address Filtering mask is dis-
played. For descriptions of the individual fields, see Section 7.2.2.4, "Add Rule for IP Address
Filtering".
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.2.2.9 Delete IP Address Filtering Rule
If rules for IP address filtering have been defined, you can disable individual IP address filtering
rules.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Address Filtering > (right-click) selected rule > Delete IP Address Filtering
Rule
A warning is displayed. Confirm this message with OK. Another message is displayed. Click
Delete followed by OK in the confirmation mask (save the new configuration status permanently
with the Save icon in the control area).