Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-38 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
7.2.3 IP Accounting
The IP Accounting option is used to count bytes that are transferred via PPP, DSL and/or LAN2
interface. The "IP Accounting client" add-on software is required for this feature and must be
installed on a PC.
The transferred data is counted and totalled on HG 1500. The IP Accounting client is connected
to HG 1500 via the IP network and permits the data entered to be used.
You can enable and disable IP Accounting and set the login parameters.
WBM path:
WBM > Explorers > Security > IP Accounting
Right-click IP Accounting to display a menu containing the following entries:
> Display IP Accounting Parameters
> Edit IP Accounting Parameters
7.2.3.1 Display IP Accounting Parameters
You can display the settings that apply to IP Accounting.
WBM path:
WBM > Explorers > Security > (right-click) IP Accounting > Display IP Accounting Parameters
The IP Accounting mask is displayed. For descriptions of the individual fields, see Section
7.2.3.2, "Edit IP Accounting Parameters".
7.2.3.2 Edit IP Accounting Parameters
This option allows you to edit the settings that apply to IP Accounting.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (right-click) IP Accounting > Edit IP Accounting Parameters
The IP Accounting mask is displayed. You can edit the following fields:
● User Login Name: In the input field, enter a name to be specified by the user when logging
on.
● Login Password: Enter a password for user identification in the input field.
● Restrict Access to One IP Address: Select this checkbox if the name and password spec-
ified should only be permitted for access from a single IP address. Otherwise, access is
permitted from any IP address for the user identified by this name and password.