Specifications
hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-39
Nur für den internen Gebrauch
Explorers
Security
● IP Address of IP Accounting Client: Enter the IP address of the PC on which the "IP Ac-
counting Client" software is installed. The entry 255.255.255.255 completely disables
IP Accounting.
● IP Accounting on LAN1-to-LAN2 Connection: Select this checkbox if IP Accounting should
also be activated for data packets to be transported between LAN1 and LAN2. If the para-
meter LAN2 is not set to LAN2 in the Network Interfaces menu (see Section 7.3.3, "LAN2
([not used])"), then IP Accounting is always active.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.2.4 IP Administration Access
IP Administration Access specifies the IP addresses from which HG 1500 can be administered.
WBM path:
WBM > Explorers > Security > IP Administration Access
Right-click IP Administration Access to display a menu containing the following entries:
> Delete All IP Addresses for Administration
IP Administration Access (folder):
Double-click IP Administration Access to display the following entries:
> Telnet
> Web-based management
>
If SSL is enabled (see Section 7.2.6.1, "Initial Configuration and Activation of SSL"),
the Tel n e t option is not available.