Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-42 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
WBM path for Telnet access:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Administration Access > (right-click) Telnet > Enable Access Check
A warning is displayed. Confirm this message with OK (save the new configuration status per-
manently with the Save icon in the control area).
7.2.4.6 Disable Access Check
If IP administration addresses have already been configured (see Section 7.2.4.7, "Add IP
Address for Administration"), you can disable the access check for permitted IP addresses.
WBM path for WBM access:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Administration Access > (right-click) Web-based management > Disable Ac-
cess Check
WBM path for Telnet access:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Administration Access > (right-click) Telnet > Disable Access Check
A warning is displayed. Confirm this message with OK (save the new configuration status per-
manently with the Save icon in the control area).
>
If SSL is enabled (see Section 7.2.6.1, "Initial Configuration and Activation of SSL"),
the Telnet option is not available.
>
If SSL is enabled (see Section 7.2.6.1, "Initial Configuration and Activation of SSL"),
the Telnet option is not available.