Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-43
Nur für den internen Gebrauch
Explorers
Security
7.2.4.7 Add IP Address for Administration
You can configure new IP addresses for administration access to HiPath HG 1500. These ad-
dresses can be configured separately depending on whether WBM or Telnet access is select-
ed.
WBM path for WBM access:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Administration Access > (right-click) Web-based management > Add IP
Address for Administration
WBM path for Telnet access:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) IP Administration Access > (right-click) Te lnet > Add IP Address for Administ-
ration
The Add IP Address for Administration mask is displayed. You can edit the following fields:
● Permitted IP Address: Enter the IP address to which you want to assign Telnet or WBM
access rights. You must enter 0 if you want to permit access for all subscribers in a network
(for example enter 192.1.13.0 for the network 192.1.13.x).
● Web-Based Management Access: Select this checkbox if WBM access should be permit-
ted from the specified address.
● Telnet Access: This field is available if SSL is disabled. Select this checkbox if Telnet ac-
cess should be permitted from the specified address.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
>
If SSL is enabled (see Section 7.2.6.1, "Initial Configuration and Activation of SSL"),
the Telnet option is not available.