Specifications
Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-66 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
7.2.5.38 Display IPsec Services
You can view a list of all active services containing detailed information in a table.
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Services > (right-click) Active
Services > Display IPsec Services
The Active IPsec/PKI-Based Services mask is displayed. Each line in the table shown repre-
sents an active service. For descriptions of the individual columns, see Section 7.2.5.42, "Ad-
ding IPsec service". The relevant "pass" and "deny" rules are also displayed for each service.
The assignment of rules and services is performed under Rules (see Section 7.2.5.64, "Adding
rules").
7.2.5.39 Display IPsec Service
This option allows you to display details on an active service. This is only possible if you have
already configured a service (see Section 7.2.5.42, "Adding IPsec service") and activated the
configuration (see Section 7.2.5.2, "Activate the Configured VPN Tables").
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Services > (double-click) Ac-
tive Services > (right-click) selected service > Display IPsec Service
The Active IPsec/PKI-Based Services mask is displayed. For descriptions of the individual
fields, see Section 7.2.5.42, "Adding IPsec service". The relevant "pass" and "deny" rules are
also displayed for each service. The assignment of rules and services is performed under
Rules (see Section 7.2.5.64, "Adding rules").
7.2.5.40 Configured Services
You can use the Configured Services function to manage services. Configured services only
become activated services (see Section 7.2.5.37, "Active Services") after activation (see Sec-
tion 7.2.5.2, "Activate the Configured VPN Tables").
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Services > Configured Ser-
vices
Right-click Configured Services to display a menu containing the following entries:
> Display IPsec Services
> Adding IPsec service