Specifications
hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-67
Nur für den internen Gebrauch
Explorers
Security
Configured Services (folder):
If services have already been added (see Section 7.2.5.42, "Adding IPsec service"), Configu-
red Services is displayed as a folder icon. In this case, double-click Configured Services in the
tree structure to view the defined services.
Configured services that have already been activated (see Section 7.2.5.2, "Activate the Con-
figured VPN Tables") are indicated by a dark and struck-through bullet. Services that have not
yet been activated are marked by a bright bullet.
Right-click an individual service to display a menu containing the following entry:
> Display IPsec Service
> Rename IPsec Service
> Edit IPsec Service
> Delete IPsec Service
7.2.5.41 Display IPsec Services
You can view a table listing detailed information for all configured services.
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Services > (right-click) Con-
figured Services > Display IPsec Services
The Configured IPsec/PKI-Based Services mask is displayed. Each line in the table shown rep-
resents an active service. For descriptions of the individual columns, see Section 7.2.5.42, "Ad-
ding IPsec service". The relevant "pass" and "deny" rules are also displayed for each service.
The assignment of rules and services is performed under Rules (see Section 7.2.5.64, "Adding
rules").
7.2.5.42 Adding IPsec service
You can add a new service for IPsec.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) VPN > (double-click) Services > (right-click) Configured Services > Add IPsec
Service
The Add Configured IPsec/PKI-Based Service mask is displayed. You can edit the following
fields:
● Name of the Service: This field contains the name of the newly configured service. Enter
a character string in this field.
● Source Port: Enter the number of the port which is to be used for transferring data to the
transmit side. In this field, "0" indicates any (unknown) port.