Specifications
Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-68 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
● Destination Port: Enter the number of the port which is to be used for transferring data to
the receive side. In this field, "0" indicates any (unknown) port.
● IP Protocol: Select the IP protocol to be used for transfer (you can choose between All Pro-
tocol Types, ICMP, TCP and UDP).
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Edit IPsec Service mask is displayed.
7.2.5.43 Display IPsec Service
This option allows you to display details on a configured service. This is only possible if you
have already configured a service (see Section 7.2.5.42, "Adding IPsec service").
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Services > (double-click)
Configured Services > (right-click) selected service > Display IPsec Service
The Configured IPsec/PKI-Based Service mask is displayed. For descriptions of the individual
fields, see Section 7.2.5.42, "Adding IPsec service". The relevant "pass" and "deny" rules are
also displayed for each service. The assignment of rules and services is performed under
Rules (see Section 7.2.5.64, "Adding rules").
7.2.5.44 Rename IPsec Service
You can change the name of a configured service (see Section 7.2.5.42, "Adding IPsec ser-
vice"). All other service-specific data remains unchanged.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) VPN > (double-click) Services > (double-click) Configured Services > (right-
click) selected service > Rename IPsec Service
The Configured IPsec/PKI-Based Service mask is displayed. You can edit the following field:
● Name of the Service: Change the name of the service in this field.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The renaming mask remains visible.