Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-69
Nur für den internen Gebrauch
Explorers
Security
7.2.5.45 Edit IPsec Service
This option allows you to display details on a configured service. This is only possible if you
have already configured a service (see Section 7.2.5.42, "Adding IPsec service") but not yet
activated it (bright bullet).
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) VPN > (double-click) Services > (double-click) Configured Services > (right-
click) selected service > Edit IPsec Service
The Configured IPsec/PKI-Based Service mask is displayed. For descriptions of the individual
fields, see Section 7.2.5.42, "Adding IPsec service".
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Edit IPsec Service mask remains visible.
7.2.5.46 Delete IPsec Service
You can delete a configured service (see Section 7.2.5.42, "Adding IPsec service").
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) VPN > (double-click) Services > (double-click) Configured Services > (right-
click) selected service > Delete IPsec Service
A warning is displayed. Click Delete followed by OK in the confirmation mask (save the new
configuration status permanently with the Save icon in the control area).
7.2.5.47 Tunnels
Tunnel is the term used to describe the transportation of encrypted data packets to a defined
endpoint.
Background information:
See Section 9.6.3, "IPsec Tunnel"
WBM path:
WBM > Explorers > Security > (double-click) VPN > Tunnels
>
If you want to edit an activated service, you must delete it first (see Section 7.2.5.46,
"Delete IPsec Service"). Then create a new IPsec service.