Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-77
Nur für den internen Gebrauch
Explorers
Security
7.2.5.59 Active Rules
Active rules become configured rules when the configuration is enabled – see Section 7.2.5.2,
"Activate the Configured VPN Tables".
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Rules > Active Rules
Right-click Active Rules to display a menu containing the following entry:
> Displaying rules
Active Rules (folder):
If configured rules (see Section 7.2.5.62, "Configured Rules") were activated by activating the
configuration (see Section 7.2.5.2, "Activate the Configured VPN Tables"), Active Rules is dis-
played as a folder icon. In this case, double-click Active Rules in the tree structure to view the
activated rules. Right-click an individual rule to display a menu containing the following entries:
> Displaying rules
7.2.5.60 Displaying rules
You can view a table listing detailed information for all active rules.
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Rules > (right-click) Active
Rules > Display Rules
The Active IPsec Rules mask is displayed. Each line in the table displayed represents an active
rule. For descriptions of the individual columns, see Section 7.2.5.64, "Adding rules".
The table can be sorted based on the columns Priority, Service, Rule-Based Action, Encryption
Required, and Rule State. Click a column heading to sort the table on the basis of the associ-
ated column. The column header currently used as the sort criterion is indicated by a small tri-
angle.
7.2.5.61 Displaying rules
This option allows you to display details on an active rule. This is only possible if you have al-
ready configured a rule (see Section 7.2.5.64, "Adding rules") and activated the configuration
(see Section 7.2.5.2, "Activate the Configured VPN Tables").