Specifications
Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-80 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Security
tion network if 0.0.0.0 is specified as the destination IP address for transmitting packets
in a tunnel. Alternatively, you can specify an IP address between 0.0.0.1 and
255.255.255.254 to transmit packets in a tunnel.
● Tunnel on Receive Side: Assign the tunnel on the receive side to which this rule should ap-
ply. IP packets received by the network are retrieved from this tunnel. Select No Tunnel As-
signment if no tunnel should be assigned on the receive side.
● Tunnel on Transmit Side: At the transmit side, assign the tunnel to which this rule should
apply. IP packets destined for the network are sent through this tunnel. Select No Tunnel
Assignment if no tunnel should be assigned on the transmit side.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Configured IPsec Rule mask is displayed.
7.2.5.65 Displaying rules
This option allows you to display details on a configure rule. This is only possible if you have
already configured a rule (see Section 7.2.5.64, "Adding rules").
WBM path:
WBM > Explorers > Security > (double-click) VPN > (double-click) Rules > (double-click) Con-
figured Rules > (right-click) selected rule > Display Rule
The Configured IPsec Rule mask is displayed. For descriptions of the individual fields, see Sec-
tion 7.2.5.64, "Adding rules".
7.2.5.66 Editing rules
You can edit the data for a configured rule. This is only possible if you have already configured
a rule (see Section 7.2.5.64, "Adding rules").
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Security
> (double-click) VPN > (double-click) Rules > (double-click) Configured Rules > (right-click) se-
lected rule > Edit Rule
>
At least one tunnel assignment (either on the receive side or the transmit side)
is required if the parameter Encryption Required is activated.
>
You cannot modify rules that have a rule for the opposite direction (see Section
7.2.5.67, "Add Rule for Opposite Direction"). If this is the case, you must first delete
the rule for the opposite direction (see Section 7.2.5.68, "Deleting rules").