Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-106 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Network Interfaces
– Signaling data: Enter a value for the priority of the layer 2 QoS class "Signaling Data".
Values between 0 and 7 are permitted. Default = 3.
– Voice/Fax/Modem Payload: Enter a value for the priority of the layer 2 QoS class
"Voice/Fax/Modem Payload". Values between 0 and 7 are permitted.
Default = 5.
– Network control: Enter a value for the priority of the layer 2 QoS class "Network Con-
trol". Values between 0 and 7 are permitted. Default = 0.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.3.3 LAN2 ([not used])
With this option, you can configure LAN2 interface details. Unlike the LAN1 interface, the func-
tion (mode) of the LAN2 interface is not predefined for the HG 1500. This allows a DSL con-
nection to be established, for example.
Background information:
See Section 9.1, "Environmental Requirements for VoIP"
See Section 9.2, "Bandwidth Requirements in LAN/WAN Environments"
See Section 9.3, "Quality of Service (QoS)"
WBM path:
WBM > Explorers > Network Interfaces > LAN2 ([not used])
Right-click LAN2 ([not used]) to display a menu containing the following entries:
> Display LAN2 Mode
> Display LAN2 Interface
> Edit LAN2 Interface
If the LAN2 interface has already been configured as a DSL connection (of the type PPTP or
PPPoE), the following two options will also be available:
> Display ACD
> Edit ACD
>
If one or more Internet telephony service providers are activated on an HG1500 sys-
tem, a DSL connection to the Internet is not permitted on this system. Another router
must be used to connect to the Internet.