Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-107
Nur für den internen Gebrauch
Explorers
Network Interfaces
7.3.3.1 Display LAN2 Mode
This option allows you to check if the LAN2 interface of the HG 1500 is currently in use, and
what mode has been configured.
WBM path:
WBM > Explorers > Network Interfaces > (right-click) LAN2 ([not used]) > Display LAN2 Mode
The Operating Mode of Second LAN Interface mask is displayed.
7.3.3.2 Display LAN2 Interface
You can display detailed information on using the LAN2 interface. This option is only available
if a function has been configured for the LAN2 interface (see Section 7.3.3.3, "Edit LAN2 Inter-
face").
WBM path:
WBM > Explorers > Network Interfaces > (right-click) LAN2 ([not used]) > Display LAN2 Inter-
face
The LAN2 mask is displayed. For descriptions of the individual fields, see Section 7.3.3.3, "Edit
LAN2 Interface".
7.3.3.3 Edit LAN2 Interface
This option allows you to display detailed information on how to use the LAN2 interface.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Network
Interfaces > (right-click) LAN2 ([not used]) > Edit LAN2 Interface
The LAN2 mask is displayed. The display and the available fields depend on the current setting
in the first field Use the Second LAN as. For this reason, first select the required function of the
LAN2 interface in this field. The following entries are available for selection:
● Not configured or deactivated: Do not use the LAN2 interface.
● LAN2: Use the LAN2 interface to connect the system to a second LAN.
(see Subsection Selected connection type: LAN2)
● DSL Connection Type PPTP: Use the LAN2 to connect via DSL to a PPTP connection.
(see Subsection Selected connection type: DSL Connection Type PPTP)
● DSL Connection Type PPPoE: Use the LAN2 interface to connect via DSL to a PPPoE con-
nection.
(see Subsection Selected connection type: DSL Connection Type PPPoE)