Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-110 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Network Interfaces
● Name of the Internet Service Provider: Enter a name of your choice here with which you
can identify the ISP.
● PPP Default Header: Specify whether the "default header" should be transferred for the
recipient.
● IP Header Compression: Specify whether TCP headers should be compressed. UDP and
RTP headers are always compressed.
● Send LCP Echo Request: Specify if an LCP echo request should be sent. This function is
used to check if the connection is still active.
● Automatic PPP Connection: Specify if the PPP connection should be automatically estab-
lished at system startup.
● Automatic PPP Reconnection: Specify if the PPP connection should be automatically re-
established after a connection cleardown (for example, in the case of ISP access with flat
rate and forced cleardown after 24 hours).
PPTP Parameter:
● Local IP Address of the Control Connection: Enter the IP address of the HiPath HG 1500
used for PPTP connections. The default value is 10.0.0.140. The addresses 0.0.0.0 and
255.255.255.255 are not allowed.
● Remote IP Address of the Control Connection: Enter the IP address of the host computer
to which the PPTP connection should be established. The default value is 10.0.0.138. The
addresses 0.0.0.0 and 255.255.255.255 are not allowed.
● Remote Netmask for the Control Connection: Enter the netmask for the PPTP connection
in this field.
Short Hold:
● Short Hold: Select this checkbox if you want to activate the "Short Hold" function.
● Short Hold Time (sec): Enter the inactivity timeout after which the connection should be
cleared down. The connection will be reestablished automatically as soon as new data
packets are received. The short-hold timer is only triggered by outgoing packets.
Authentication:
● PPP Authentication: Specify whether authentication should be performed. The parameter
mask is extended if this check box is selected:
– PAP Authentication Mode: Specify which type of authentication should be used for the
PPP connection (PAP Client, PAP Host, not used).
– PAP Pa s swo r d : Specify the password to be entered by the user for identification in the
case of PAP authentication. Data cannot be entered in the field if PAP authentication
is not used.