Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-115
Nur für den internen Gebrauch
Explorers
Routing
WBM path:
WBM > Explorers > Routing > (double-click) IP Routing > (right-click) Static Routes > Display
Static Route Table
The Static Route Table mask is displayed.
For descriptions of the individual fields, see Section 7.4.1.3, "Add Static Route".
7.4.1.3 Add Static Route
You can create a new static route between two IP devices.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) IP Routing > (right-click) Static Routes > Add Static Route
The Add Static Route mask is displayed. You can edit the following fields:
● Route Name: The name of the static route. Enter a character string.
● Destination Network/Host: The IP address of the destination network.
● Destination Netmask: The subnet mask of the destination network.
● Route Gateway: The IP address of the next router on this route or the IP address of the
local or remote interface of a PSTN peer.
The route index is automatically assigned and only displayed for information purposes. It can-
not be modified.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.4.1.4 Display Static Route
You can view the data associated with a configured static route (see Section 7.4.1.3, "Add
Static Route").
WBM path:
WBM > Explorers > Routing > (double-click) IP Routing > (double-click) Static Routes > (right-
click) selected static route > Display Static Route
The Static Route mask is displayed. For descriptions of the individual fields, see Section
7.4.1.3, "Add Static Route".