Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-117
Nur für den internen Gebrauch
Explorers
Routing
7.4.1.8 Display Default Router
This option allows you to view the current settings for the default router.
WBM path:
WBM > Explorers > Routing > (double-click) IP Routing > (right-click) Default Router > Display
Default Router.
The Default Routermask is displayed. For descriptions of the individual fields, see Section
7.4.1.9, "Editing a default router".
7.4.1.9 Editing a default router
You can edit the current default router settings.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) IP Routing > (right-click) Default Router > Edit Default Router
The Default Router mask is displayed. You can edit the following fields:
● Default Routing via: Select the interface for the default router (the options available are:
No interface or LAN).
● IP Address of Default Router: Enter the IP address of the default router in this field, provid-
ing you selected LAN as the interface in the Default Routing field above.
You must select No interface and enter 0.0.0.0 if a default router is not to be set.
When all settings are complete, click Apply followed by OK in the confirmation mask (save the
new configuration status permanently with the Save icon in the control area).