Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-118 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Routing
7.4.1.10 DNS Settings
You can display, and where applicable, edit the IP address of the DNS server. The setting is
necessary for trunking with dynamic IP addresses.
WBM path:
WBM > Explorers > Routing > (double-click) IP Routing > DNS Settings
Right-click on DNS Settings to display a menu with the following entries:
> Display DNS Settings
> Edit DNS Settings
7.4.1.11 Display DNS Settings
You can check the IP address currently set for the DNS server.
WBM path:
WBM > Explorers > Routing > (double-click) IP Routing > (right-click) DNS Settings > Display
DNS Settings
The DNS Settings mask is displayed. For descriptions of the individual fields, see Section
7.4.1.12, "Edit DNS Settings".
7.4.1.12 Edit DNS Settings
You can set the IP address of the DNS server.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) IP Routing > (right-click) DNS Settings > Edit DNS Settings
The Default Settings mask is displayed. You can edit the following fields:
● IP Address of DNS Server: In this field, enter the IP address of the DNS server.
When all settings are complete, click Apply followed by OK in the confirmation mask (save the
new configuration status permanently with the Save icon in the control area).