Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-122 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Routing
IP Mapping (folder):
If IP maps have already been added (see Section 7.4.2.3, "Adding an IP map"), IP Mapping is
displayed as an expandable folder. In this case, double-click IP Mapping in the tree structure to
view the configured IP maps. Right-click a directory or bullet point to display a menu containing
the following entries:
> Display IP Map
> Editing an IP map
> Deleting an IP map
7.4.2.1 Display IP Mapping Netmask
You can view the masking IP for IP mapping.
WBM path:
WBM > Explorers > Routing > (right-click) IP mapping > Display IP Mapping Netmask
The IP Mapping mask containing the netmask is displayed.
7.4.2.2 Edit IP Mapping Netmask
The network mask defines which part of an IP address is mapped when translating to the des-
tination IP address. The unmasked address part is transferred directly to the destination ad-
dress. You can edit the masking IP for IP mapping.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (right-click) IP mapping > Edit IP Mapping Netmask
The IP Mapping mask is displayed. You can edit the following field:
● IP Mapping Netmask: Specify a valid netmask.
When all settings are complete, click Apply followed by OK in the confirmation mask (save the
new configuration status permanently with the Save icon in the control area).