Specifications
Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-126 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Routing
● Protocol: Select the transport protocol to be used (TCP or UDP).
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.4.3.2 NAT Table Editor
The NAT Table Editor allows you to edit all existing and new NAT entries at once for network
address translation.
WBM path:
WBM > Explorers > Routing > (right-click) NAT > NAT Table Editor
A separate window containing the Table Editor is displayed. Each line in the table represents
an NAT entry. For descriptions of the individual fields, see Section 7.4.3.1, "Add NAT". For in-
formation on how to use the Table Editor, see Section 3.2.5, "Table Editor".
7.4.3.3 Display NAT
You can view details on a NAT entry provided you have already created NAT entries (see Sec-
tion 7.4.3.1, "Add NAT").
WBM path:
WBM > Explorers > Routing > (double-click) NAT > (right-click) selected local IP address > Dis-
play NAT
The NAT mask is displayed. For descriptions of the individual fields, see Section 7.4.3.1, "Add
NAT".
7.4.3.4 Edit NAT
You can edit details on a NAT entry provided you have already created NAT entries (see Section
7.4.3.1, "Add NAT").
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) NAT > (right-click) selected local IP address > Edit NAT
The NAT mask is displayed. For descriptions of the individual fields, see Section 7.4.3.1, "Add
NAT".
>
The set transport protocol applies both for local and global addresses.