Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-129
Nur für den internen Gebrauch
Explorers
Routing
The entries are as follows:
Identification of User 1 for Scripting: HOST:ERT005
Identification of User 2 for Scripting: USER:KJUMBERT
New Password for Scripting: PASSWORD:123456
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.4.4.3 PPP Log
You can load the PPP log file of the gateway via HTTP and delete it on the gateway. The log file
contains data on PAP or CHAP authentication errors. If the log file was deleted, it is automati-
cally recreated and described.
WBM path:
WBM > Explorers > Routing > (double-click) PSTN > PPP Log
Right-click PPP Log to display a menu containing the following entries:
> Load via HTTP
> Clear PPP Log
7.4.4.4 Load via HTTP
You can load the gateway’s PPP log file via HTTP.
WBM path:
WBM > Explorers > Routing > (double-click) PSTN > (right-click) PPP Log > Load via HTTP
You must confirm the advisory message that appears with OK. Depending on your browser set-
tings, another dialog may now appear in which you can decide if you want to save the down-
loaded log file or open it directly in the default editor.
7.4.4.5 Clear PPP Log
You can delete the PPP log file from the gateway machine.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) PSTN > (right-click) PPP Log > Clear PPP Log
An important warning is displayed.
Click Delete Log followed by OK in the confirmation mask (save the new configuration status
permanently with the Save icon in the control area).