Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-131
Nur für den internen Gebrauch
Explorers
Routing
> Display Call Address
> Edit Call Address
> Delete Call Address
7.4.4.7 Default PSTN Peer
The default PSTN peer is also a specially colored expandable folder. Double-click Default
PSTN Peer to open the folder. The following entry is displayed:
> Default Station Number
Right-click Default PSTN Peer to display a menu containing the following entries:
> Display Default PSTN Peer
> Edit Default PSTN Peer
> Reset to Factory Default
7.4.4.8 Add PSTN Peer
You can create a new PSTN peer.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) PSTN > (right-click) PSTN peers > Add PSTN Peer
The Add PSTN Peer mask is displayed. You can edit the following fields:
● Peer Name: Enter a name of your choice for the PSTN peer. The field can contain up to 14
characters.
● PSTN Connection Type: Select whether the PSTN connection is to be used (option Active).
You can preconfigure the PSTN peer if you select Not configured. However, this setting pre-
vents a connection being set up over this PSTN peer.
>
The options Default Router, Internet Access with DNS Requestand NAT (see
below for descriptions) can only be enabled for one active PSTN peer.