Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-134 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Routing
Authentication:
● PPP Authentication: Specify whether authentication should be performed. The parameter
mask is extended if this check box is selected:
– PAP Authentication Mode: Specify which type of authentication should be used for the
PPP connection (PAP Client, PAP Ho s t, not used).
– PAP Pa s swo r d : Specify the password to be entered by the user for identification in the
case of PAP authentication. Data cannot be entered in the field if PAP authentication
is not used.
– CHAP Authentication Mode: Specify which type of authentication should be used for
the PPP connection (CHAP Client, CHAP Host, CHAP Symmetric not used).
– CHAP Password: Specify the password to be entered by the user for identification in
the case of CHAP authentication. Data cannot be entered in the field if CHAP authen-
tication is not used.
– PPP User Name: Enter a user name of your choice that should be used for authenti-
cation via PAP or CHAP.
The following table shows the configurations permitted. For authentication, "client" part-
ners must always authenticate themselves at the "host" partner.
CHAP Configuration
HG 1500 Teleworker PC or HG 1500 Connection
CHAP: not used CHAP: not used active, without authentication
CHAP: not used CHAP Client active, with authentication
CHAP: not used CHAP Host Inactive
CHAP: not used CHAP Symmetric Inactive
CHAP:Client CHAP: not used active, with authentication
CHAP:Client CHAP Client active, with authentication
CHAP:Client CHAP Host active, with authentication
CHAP:Client CHAP Symmetric Inactive
CHAP:Host CHAP: not used Inactive
CHAP:Host CHAP Client active, with authentication
CHAP:Host CHAP Host Inactive
CHAP:Host CHAP:Symmetric Inactive
CHAP:Symmetric CHAP: not used Inactive
CHAP:Symmetric CHAP Client Inactive
Table 7-2 PAP and CHAP Configuration Options