Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-139
Nur für den internen Gebrauch
Explorers
Routing
7.4.4.12 Adding a station number
Up to five call numbers can be configured for each PSTN peer. A station number is checked as
it is being transferred, and calls are only accepted if a PSTN peer is assigned appropriate call
authorization for the incoming station number.
If general dialing parameters are configured (see Section 7.4.5, "Dialing Parameters"), these
are evaluated during configuration and station number checking. All call numbers are converted
into the lowest implicit format.
Example:
The following general Dialing Parameters are used:
Irrespective of the format of the station number transferred ("0722 123" or "0089722123" or
"000 49 89 722 123"), all are changed to "123" as the lowest implicit format.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) PSTN > (double-click) PSTN peers > (right-click) selected PSTN peer > Add
Station Number
The Add PSTN Station Number mask is displayed. You can edit the following entries:
● Station Number: Enter the station number at which a PSTN peer can be reached. It must
be unique within the entire configuration and can comprise up to 22 decimal digits (0 to 9).
Hyphens are permitted.
● Direction: Enter the type of connection that can be set up using this station number.
– Blocked: The number cannot be used.
– Incoming: The peer may make calls but may not be called.
– Outgoing: The peer may be called but may not make calls.
– Incoming and Outgoing: The peer may make calls and be called.
Click Apply. You must confirm the advisory message that appears with OK. You must also click
OK in the confirmation mask (save the new configuration status permanently with the Save icon
in the control area).
International prefix= 000 Country code = 49
National prefix = 00 Prefix = 89
Prefix for trunk access = 0 Connection number = 722