Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-141
Nur für den internen Gebrauch
Explorers
Routing
7.4.4.16 Display Default PSTN Peer
You can view the current settings for the default PSTN peer.
WBM path:
WBM > Explorers > Routing > (double-click) PSTN > (double-click) PSTN peers > (right-click)
Default PSTN Peer > Display Default PSTN Peer
The Default PSTN Peer mask is displayed. For descriptions of the individual fields, see Section
7.4.4.8, "Add PSTN Peer".
7.4.4.17 Edit Default PSTN Peer
You can edit the current settings for the default PSTN peer.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) PSTN > (double-click) PSTN peers > (right-click) Default PSTN Peer > Edit De-
fault PSTN Peer
The Default PSTN Peer mask is displayed. For descriptions of the individual fields, see Section
7.4.4.8, "Add PSTN Peer".
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.4.4.18 Reset to Factory Default
You can reset the default PSTN peer settings. However, this does not affect the assigned sta-
tion number. You can reset these separately to the factory defaults – see Section 7.4.4.22, "Re-
set to Factory Default".
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Routing
> (double-click) PSTN > (double-click) PSTN peers > (right-click) Default PSTN Peer > Reset
to Factory Default
Please note the warning displayed. Finally, click Reset to Factory Default and OK in the confir-
mation mask (save the new configuration status permanently with the Save icon in the control
area).