Specifications
hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-145
Nur für den internen Gebrauch
Explorers
Routing
E.164
● International Prefix: The prefix for international numbers (including the trunk access digit).
● National Prefix: The prefix for national calls (including the trunk access digit).
● Subscriber Prefix: The trunk access digit or the prefix for calls to the public telephone net-
work.
● Country Code: The country ID for the location of the HG 1500.
● Area Code: The area code for the location of the HG 1500.
● Location Code: The location code for the HG 1500 (if available).
Example:
In HiPath 3000, 0 is configured as the trunk access digit. The system is located in Munich and
its connection number is 722:
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.4.5.3 Configured Subscribers
These are configured S
0
subscribers.
WBM path:
WBM > Explorers > Routing > (double-click) Dialing Parameters > Configured Subscribers
Right-click [Configured Subscribers to display a menu containing the following entries:
> Display Configured Subscribers
International prefix= 000 Country code = 49
National prefix = 00 Prefix = 89
Prefix for trunk access = 0 Connection number = 722
>
Station number analysis is exclusively performed by the HiPath 3000/5000 V8 - HG
1500 V8 on the basis of the dialing parameters configured here and irrespective of
any other corresponding HiPath 3000 parameters. You must explicitly ensure that
the numbering scheme used for the HiPath 3000/5000 V8 - HG 1500 V8 is set up in
accordance with the relevant configuration of the HiPath 3000.
Based on the above example, this means:
If the HiPath 3000 signals the HG 1500 using the implicit station number format with
exchange code 0, the prefix for trunk access must also be set to 0 in the dialing pa-
rameters. In the example, the national prefix is set to 00 and the international prefix
is 000. In both cases, the first 0 stands for the trunk access code.