Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-164 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Voice Gateway
Background information:
See Section 9.2, "Bandwidth Requirements in LAN/WAN Environments"
WBM path:
WBM > Explorers > Voice Gateway > Destination Codec Parameters
Right-click Destination Codec Parameters to display a menu with the following entries:
> Adding Destination Codec Parameters
> Editing destination codec parameters
> Deleting destination codec parameters
7.5.5.1 Adding Destination Codec Parameters
You can add destination codec parameters for a specified IP address.
WBM path:
WBM (Write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (right-click) Destination codec parameters > Add Destination Codec Parameters.
The Destination Codec Parameters mask is displayed. In the "Codec" table you can enter the
following parameters for the protocols G.711 A law, G.711 µ law, G.723, G.729A and G.729AB :
● Priority: This field contains the priority for using the codec. The priority can be set from 1
(high) to 7 (low). Assign different priorities to the codecs. In the default configuration, G.711
A law has priority 3, G.711 µ law has priority 4, G.723 has priority 5, G.729A has priority 2,
and G.729AB has priority 1. G.729B and G.729 have the status "not used“.
● Voice Activity Detection (VAD) This field defines whether or not Voice Activity Detection
(VAD) should be used for the relevant codec.
● Frame Size: You can set the sampling rate in this field. The adjustable values depend on
the codecs.
Destination
● Destination Address Type: Select the host, subnet or area.
● IP address: Enter the associated IP address for the entry