Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-167
Nur für den internen Gebrauch
Explorers
Voice Gateway
7.5.6.3 Edit
This function allows you to edit settings for the transparent transmission of fax and modem data
via a B channel and for PBX node monitoring.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (right-click) IP Networking Data > Edit
The IP Networking Data mask is displayed. You can edit the following fields:
● Monitoring Timer (sec): In this field, enter the time interval for node monitoring.
● Alive Monitoring via: Specify how node monitoring should be performed. The following op-
tions are available: Ping (ICMP) or TCP.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area).
7.5.6.4 Nodes
PBX nodes (HiPath systems) can be identified by a number from 1 to 64. The IP addresses can
be assigned to the identification number.
The functions described below can be used to configure and administer PBX nodes, edit the
associated IP addresses and codec settings and configure call numbers for these nodes.
These configurations are automatically generated in the case of HiPath 5000 RSM. The H.323
parameters are used as a template for the codecs (see Section 7.5.1, "H.323 Parameters").
WBM path:
WBM > Explorers > Voice Gateway > (double-click) PBX > Nodes
Right-click Nodes to display a menu containing the following entry:
> Add PBX Node
Nodes (folder):
If nodes have already been added (see Section 7.5.6.5, "Add PBX Node"), the Nodes entry is
displayed as an expandable folder. Double-click Nodes to open the folder. A node number is
displayed for each entry in the open folder. Right-click a node number to display a menu con-
taining the following entries: