Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-169
Nur für den internen Gebrauch
Explorers
Voice Gateway
The PBX Node / IP Addresses mask is displayed. You can edit the following fields:
● LAN trunking protocol: Select the required voice transmission protocol from the list box.
The following protocols are available:
–H.323-Q
– Native H.323
–SIP-Q
– Native SIP
● Using ILS for Address Resolution: This field activates and deactivates the ILS function (se-
lected field = on). If the function is activated, the boards do not have to be assigned IP ad-
dresses manually and Alive Monitoring is always enabled. This is why all other fields in this
dialog are deactivated when this function is activated.
● HXG Boards IP address: Enter the IP address of the relevant board in this field if ILS ad-
dress resolution is not used.
● Alive Monitoring: This field activates and deactivates Alive Monitoring (selected field = on)
if ILS address resolution is not used.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The PBX Node / IP Addresses mask reappears.
7.5.6.8 Display Codecs
You can view the codec parameters of HG boards in HiPath systems for which you have defined
a node number (see Section 7.5.6.5, "Add PBX Node").
WBM path:
WBM > Explorers > Voice Gateway > (double-click) PBX > (double-click) Nodes > (right-click)
selected node number > Display Codecs
The Node Codecs mask is displayed. For descriptions of the individual fields, see Section
7.5.6.9, "Edit Codecs".
7.5.6.9 Edit Codecs
You can edit the codec parameters of HG boards in HiPath systems for which you have defined
a node number (see Section 7.5.6.5, "Add PBX Node").