Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-170 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Voice Gateway
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (double-click) Nodes > (right-click) selected node number >
Edit Codecs
The Node Codecs mask reappears. You can edit the following fields:
● Codec Packetizing: Enter the number of frames per RTP packet in this field. A higher value
means a better user data/packet overhead ratio but also a higher delay. A value between
1 and 3 can be set.
● Priority for G.711 µ-law Codec: This field contains the priority with which the codec for
G.711 µ-law is available (1-7).
● Priority for G.711 A-law Codec: This field contains the priority with which the codec for
G.711 A-law is available (1-7).
● Priority for G.723 Codec: This field contains the priority with which the G.723 codec is avail-
able (1-7 or "not used").
● Priority for G.729 Codec: This field contains the priority with which the G.729 codec is avail-
able (1-7 or "not used").
● Priority for G.729A Codec: This field contains the priority with which the G.729A codec is
available (1-7 or "not used").
● Priority for G.729B Codec: This field contains the priority with which the G.729B codec is
available (1-7 or "not used").
● Priority for G.729AB Codec: This field contains the priority with which the G.729AB codec
is available (1-7 or "not used").
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Node Codecs mask reappears.
7.5.6.10 Edit PBX Node
You can edit the node number of a HiPath system.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (right-click) Nodes > Edit PBX Node
A window in which you can select the previous node number is displayed. Confirm your selec-
tion with OK.
>
Assign different priorities to the codecs. The priorities 1-7 may only be assigned to
one codec each or a codec can be assigned the "not used" priority.