Specifications
Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-172 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Voice Gateway
7.5.6.13 Adding a station number
You can add PBX route call addresses for PBX nodes (see Section 7.5.6.4, "Nodes").
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (right-click) Routing > Add Call Address
The Add PBX Route Call Address mask is displayed. You can edit the following fields:
● Node Number: In this field, select the number of the PBX node to which you want to assign
a station number.
● Station Number: In this field, enter the station number of the PBX node.
● Service: Use this selection box to define which service is configured on this node (Voice,
Modem, Fax).
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Edit PBX Route Call Address mask is dis-
played.
7.5.6.14 Delete All Call Addresses
You can delete all PBX route call addresses configured for PBX nodes at once (see Section
7.5.6.4, "Nodes").
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (right-click) Routing > Delete All Call Addresses
A warning is displayed. Click Delete followed by OK in the confirmation mask (save the new
configuration status permanently with the Save icon in the control area).
7.5.6.15 Call Address Table Editor
The Call Address Table Editor allows you to edit all existing and new
PBX route call addresses at once.
WBM path:
WBM > Explorers > Voice Gateway > (double-click) PBX > (right-click) Routing > Call Address
Ta bl e E di t o r
A separate window containing the Table Editor is displayed. Each line in the table represents a
route call address. For descriptions of the individual fields, see Section 7.5.6.13, "Adding a sta-
tion number". For information on how to use the Table Editor, see Section 3.2.5, "Table Editor".