Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-173
Nur für den internen Gebrauch
Explorers
Voice Gateway
7.5.6.16 Display Call Address
You can view detailed information on an existing PBX route call address.
WBM path:
WBM > Explorers > Voice Gateway > (double-click) PBX > (double-click) Routing > (right-click)
selected station number > Display Call Address
The PBX Route Call Address mask is displayed. For descriptions of the individual fields, see
Section 7.5.6.13, "Adding a station number".
7.5.6.17 Edit Call Address
You can edit detailed information on an existing PBX route call address.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (double-click) Routing > (right-click) selected station number
> Edit Call Address
The PBX Route Call Address mask is displayed. For descriptions of the individual fields, see
Section 7.5.6.13, "Adding a station number".
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The PBX Route Call Address mask reappears.
7.5.6.18 Delete Call Address
You can delete an existing PBX route call address.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > Voice
Gateway > (double-click) PBX > (double-click) Routing > (right-click) selected station number
> Delete Call Address
The Delete PBX Route Call Address mask is displayed. The data associated with the PBX route
call address is displayed for verification purposes.
Click Delete followed by OK in the confirmation mask (save the new configuration status per-
manently with the Save icon in the control area).