Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-176 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
Voice Gateway
7.5.7.6 Display Client
This allows you to display the settings for an individual SIP client.
WBM path:
WBM > Explorers > Voice Gateway > (double-click) Clients > (double-click) SIP > (right-click)
selected client > Display Client
The SIP Client mask is displayed. You can display the following fields:
● DID number of Client: Displays the internal DID of the SIP client.
● IP Address of Client: Displays the IP address or host name assigned to the SIP client.
● Client registered: Indicates whether the client is registered. Authentication Required must
be activated.
● User ID of Client: Displays the user name for SIP client access. Authentication Required
must be activated.
● Security Zone of Client: Displays the area (security zone) for confidential authentication to
the SIP client. Authentication Required must be activated.
● Use fixed IP address: For each contact, any number of communication addresses (call
numbers or IP addresses) may be used. Indicates that a fixed IP address with call number
has been assigned to the SIP client.
● Authentication Required: Indicates that the subscriber requires authentication (user name
and password) in order to log on to the SIP client.
● SMG subscribers (only registered in backup mode): Indicates that the station is not logged
on to HiPath 3000/5000. This subscriber is only available during emergency operation.
Button
Refresh: Click this button to refresh the table.