Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-178 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
VCAPI
7.6 VCAPI
VCAPI is a protocol with which an ISDN interface on a server or network PC can be used by
PCs in the network in the same way as a local ISDN interface.
The HG 1500’s VCAPI support allows all PCs in the LAN to use the gateway’s ISDN ports di-
rectly via CAPI. This function cannot be used unless every subscriber is uniquely identifiable in
the network via a station number and IP address.
You can add or delete subscribers for VCAPI or edit their attributes. This enables you to define
your own default values via the configured default VCAPI subscriber. These values are then
automatically applied in the configuration and edit masks.
WBM path:
WBM > Explorers > VCAPI
The VCAPI tree structure is displayed.
Entries under VCAPI:
> VCAPI Subscribers
7.6.1 VCAPI Subscribers
This folder allows you to manage VCAPI subscribers.
WBM path:
WBM > Explorers > VCAPI > VCAPI Subscribers
Right-click VCAPI Subscribers to display a menu containing the following entries:
> Display All VCAPI Subscribers
> Add VCAPI Subscriber
> VCAPI Table Editor
VCAPI Subscribers (folder):
Double-click VCAPI Subscribers to display the Default Subscriber entry. A separate entry is dis-
played for each new VCAPI subscriber added (see Section 7.6.1.2, "Add VCAPI Subscriber").
Default Subscriber
Right-click Default Subscriber to display a menu containing the following entries:
> Display VCAPI Default Parameters
> Edit VCAPI Default Parameters
> Reset to Factory Default