Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-179
Nur für den internen Gebrauch
Explorers
VCAPI
User-Specified VCAPI Subscriber
Right-click one of the new VCAPI subscribers you added yourself to display a menu containing
the following entries:
> Display VCAPI Subscriber Parameters
> Edit VCAPI Subscriber Parameters
> Delete VCAPI Subscriber
7.6.1.1 Display All VCAPI Subscribers
This allows you to view a list of all VCAPI subscribers configured.
WBM path:
WBM > Explorers > VCAPI > (right-click) VCAPI Subscribers > Display All VCAPI Subscribers
The VCAPI Subscriber mask is displayed. The subscribers are listed in a table. For descriptions
of the individual fields, see Section 7.6.1.2, "Add VCAPI Subscriber".
The table entries can be sorted. An arrow after a column name indicates the sort criterion (e.g.
"Station Number"). If you wish to sort the table by another column, click the respective column
name.
7.6.1.2 Add VCAPI Subscriber
You can add a new VCAPI subscriber.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > VCAPI
> (right-click) VCAPI Subscribers > Add VCAPI Subscriber
The Add VCAPI Subscriber mask is displayed. You can edit the following fields:
● Station Number: Use this selection box to select the new VCAPI subscriber’s station num-
ber that was configured in HG 1500. Call numbers are administered with HiPath 3000
Manager E. The following appears in the selection box if no call numbers are configured:
"No default value applicable".
● IP address: Enter the IP address of the new VCAPI subscriber in this field.
● Fax Group 3: Specify whether the subscriber can use the Fax Group 3 service. If this option
is enabled, the service is automatically disabled for voice transmission.
● Voice: Specify whether the subscriber can use the voice transmission service. If this option
is enabled, the service is automatically disabled for Fax Group 3.