Specifications

Explorers Nur für den internen Gebrauch
A31003-H3580-M103-2-76A9, 01-2009
7-180 HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
hg-07.fm
VCAPI
● Digital Data: Select this checkbox if you want to enable digital data transmission for this
subscriber.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Edit VCAPI Subscriber mask is displayed.
7.6.1.3 VCAPI Table Editor
The VCAPI Table Editor allows you to edit all existing and new VCAPI subscribers at once.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > VCAPI
> (right-click) VCAPI Subscribers > VCAPI Table Editor
A separate window containing the Table Editor is displayed. Each line in the table represents a
VCAPI subscriber. For descriptions of the individual fields, see Section 7.6.1.2, "Add VCAPI
Subscriber". For information on how to use the Table Editor, see Section 3.2.5, "Table Editor".
7.6.1.4 Display VCAPI Default Parameters
You can view the default VCAPI subscriber settings.
WBM path:
WBM > Explorers > VCAPI > (double-click) VCAPI Subscribers > (right-click) Default Subscri-
ber > Display VCAPI Default Parameters
The Default VCAPI Subscriber mask is displayed. For descriptions of the individual fields, see
Section 7.6.1.5, "Edit VCAPI Default Parameters".
7.6.1.5 Edit VCAPI Default Parameters
You can edit the default VCAPI subscriber settings.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > VCAPI
> (double-click) VCAPI Subscribers > (right-click) Default Subscriber > Edit VCAPI Default Pa-
rameters
>
The activation states of the fields "Fax Group 3", "Voice" and "Digital Data" do not
define which data can actually be transferred but rather which protocol must be used
to set up a connection.