Specifications

hg-07.fm
A31003-H3580-M103-2-76A9, 01-2009
HiPath 3000/5000 V8 - HG 1500 V8, Administrator Documentation
7-181
Nur für den internen Gebrauch
Explorers
VCAPI
The Default VCAPI Subscriber mask is displayed. You can edit the following fields:
Station Number: You cannot apply a default value.
IP address: Enter the IP address of the default VCAPI subscriber in this field.
Fax Group 3: Specify whether the subscriber can use the Fax Group 3 service. If this option
is enabled, the service is automatically disabled for voice transmission.
Voice: Specify whether the subscriber can use the voice transmission service. If this option
is enabled, the service is automatically disabled for Fax Group 3.
Digital Data: Select this checkbox if you want to enable digital data transmission for this
subscriber.
Click Apply followed by OK in the confirmation mask (save the new configuration status perma-
nently with the Save icon in the control area). The Default VCAPI Subscriber mask reappears.
7.6.1.6 Reset to Factory Default
You can reset the default VCAPI subscriber settings to the factory defaults.
WBM path:
WBM (write access activated with the Padlock icon in the control area?) > Explorers > VCAPI
> (double-click) VCAPI Subscribers > (right-click) Default Subscriber > Reset to Factory Default
The Reset Default Values mask is displayed and contains a warning.
Click Reset to Factory Default and OK in the confirmation mask (save the new configuration
status permanently with the Save icon in the control area).
7.6.1.7 Display VCAPI Subscriber Parameters
You can view the settings associated with a user-specified VCAPI subscriber (see Section
7.6.1.2, "Add VCAPI Subscriber").
WBM path:
WBM > Explorers > VCAPI > (double-click) VCAPI Subscribers > (right-click) selected sub-
scriber > Display VCAPI Subscriber Parameters
The VCAPI Subscriber mask is displayed. For descriptions of the individual fields, see Section
7.6.1.5, "Edit VCAPI Default Parameters".